Angel Decoration 2500W Immersion Water Heater Boiler for Inflatable Tub Pool with Leakage Protection Switch

2500W Immersion Water Heater Boiler for Inflatable Tub Pool

Thermometer cable length about 1m/39.37inch (button cell Not Included).
Heating time It takes about 20 minutes to heat 20 liters of water to 40degrees, and 40-50 minutes to heat to 70 degrees (for reference only)
The heating time of different containers might vary).

Specifications:

• Name: Pool Water Heater
• Material: stainless steel + ABS
• Voltage: AC220-240V
• Power: 2500W
• Heater size: about 24*10*10cm/9.45*3.94*3.94inch
• Heater cable length: about 2m/78.74inch
• Packing List: Pool Water Heaterx1, Thermometerx1, Steel Scrubberx1, English Manualx1

Tip:

This water heater is suitable for the water level of 25-35cm/9.84-13.78in(about),
And it is not recommended to use this if the water level is higher than 35cm/13.78in(about) for the reason that, in that case.
The heating part of this water heater is suspended on the upper part of the water, so the water at the bottom will not be easily heated.

Important:

1. The metal heating tube must be submersed in the water, and then you can start heating.
2. It is forbidden to test the water temperature when you use this water heater for heating, you can test the water temperature after unplugging then water heater.

Notes:

Due to the lighting effects and shooting angles, the color of the item and that shown in the picture might have a nuance.
Due to manual measurement, there might be a tolerance in the product size.